Universal manual filler
New! Now also with vacuum
This special version of our 4-head manual filler is equipped with a vacuum system. This means we can fully vacuum the bottles before filling and pre-stress them with CO2. This can be done multiple times to ensure absolutely no oxygen remains in the bottle.
We conducted several tests, and the measured oxygen content dropped below zero.
This makes this machine ideally suited for filling wine.
The machine will be delivered complete, including a base and CIP system with pump.
11.599
Machine explanation
The maximum speed of our manual fillers depends on various factors such as temperature, pressure, and CO2 saturation. However, experience shows that two people can fill up to approximately 600 bottles per hour.
With one hand, the user lowers the lever and with the other, slides the bottle under the head. By releasing the lever, the bottle is pressed firmly under the filling head. The user then presses the start button on the corresponding filling head. The entire filling process then proceeds automatically. First, CO2 is injected into the bottle to remove oxygen. The time and pressure of the CO2 pre-flush are fully adjustable. After the CO2 flush, the bottle is filled until it reaches the sensor value set on the touchscreen. The bottle can then be removed, and the process begins again.
Four to eight bottles can be filled simultaneously. In practice, when the last bottle is placed under the head, the first is ready for replacement.
Specificaties
-
Dimensions: 770*986*600 mm
-
Power: 110~230V 3A max
-
Inlets: 1.5" TRI-CLAMP liquid, 1/4" CO2 inlet
-
Bottle size: 0.2L (smaller can be made by shortening the filler tube) up to 1.5L
-
Partykeks: 5L kegs with a special head.
-
600 bottles per hour for 2 people (1 filling, 1 capping)
-
1.2 bar maximum tank pressure or pump pressure
-
Filling with or without counterpressure
-
Fully adjustable to your preference
-
1-year carry-in warranty
